| |
Eργαστήριο Θερμοδυναμικής & Θερμικών Mηχανών |
ΕΞΟΠΛΙΣΜΟΣ
DW10 ATED, 2 l. HDI diesel engine (rated power 80kW at 4,000 rpm), employed in full-scale investigations with diesel exhaust after-treatment devices, as well as in engine combustion and emission studies
Alfa Romeo 1.6 l. Twin Spark SI engine on a DC engine – inverter test bed (under construction) J-65 turbojer engine for educational purpose
35,000 kcal/h air furnace with test rig for infrared thermography investigations 40,000 kcal/h boiler Boiler efficiency measurement test rig Boiler Exhaust Gas Analyzer MRU Spectra 1600Q Refrigeration system/ vacuum pump A variety of gas, air, liquid and fuel flow meters A variety of pressure sensors for the ranges from 1 mbar up to 1000 bar Fully equipped engine maintenance workshop A variety of catalytic converter and diesel filter systems for testing and assessment purposes Specially designed test rig for detailed flow distribution measurements in catalytic converters and filters, HVAC duct outlets etc. Laboratory oven (1000oC) for aging and regeneration of full-sized converters and diesel filters Three-Phase Power Logger: Fluke 1735 Energy monitor: Wattson Classic Lux meter Differential Thermometer Infrared Thermometer Sound Level Meter ( Decibel Meter) CO2 , CO, Indoor Air Quality measurement Humidity meter Differential Manometer Nuclear Radiation meter (Geiger Counter
Hardware NI Data Acquisition card 6229 (250 kSamples/s) Several NI Data Acquisition and control cards, signal conditioners SCXI 1100, SCXI 1113 ETAS MAC 2 / ETK hardware for interfacing with engine control unit (ECU) Fast acquisition quartz sensors and charge amplifier for high and low pressure indicator diagrams on diesel and SI engines A variety of thermocouples, cement-on thermocouples ultra fast response thermocouples Pressure Transmitters WIKA Type A-10 Several high performance PC’s, supported with peripherals, including an A0-sized plotter
Software NI LabVIEW v11.0 software INCA v3.2 software for interfacing with engine control unit (ECU), engine calibration and diagnostics In-house software for the performance computation of nearly all main types of exhaust after-treatment devices, integrated in the form of an automotive exhaust after-treatment systems CAE toolkit In house software for gas and steam turbine performance prediction and diagnostics TRNSYS 16 software for energy systems simulation (solar energy systems, building energy systems) Access to industrial software: MATLAB Simulink, ProE, SolidWorks, ASPEN CFD software: ANSYS 13 (CFX, FLUENT, CFD-POST) GasTurb 9 for simulation of gas turbine configurations used for propulsion or for power generation EES (Equation Engineering Software): software package used for solution of simultaneous non-linear equations for the solution of thermodynamics and heat transfer problems Programming tools: (Fortran 70/90/95, C++)
|
|
