-
Papadimitriou, C., Karamanos, SA, Karakostas, CZ, Lekidis, VA and Panetsos, P. (2004). " Multi-Objective Framework for Model Updating with Application to a Four-Span Concrete Bridge ." Proc. 2nd European Workshop on Structural Health Monitoring, C. Boller and WJ Staszewski (Eds), DEStech Publications, pp.195-202.
-
Λεκίδης, Β.Α., Καρακώστας Χ.Ζ., Σαλονικιός, Θ., Παπαδημητρίου Κ.
& Καραμάνος, Σ. "Παρακολούθηση της σεισμικής συμπεριφοράς
χαρακτηριστικών γεφυρών Ο/Σ του Ελληνικού χώρου." 14ο Εθνικό Συνέδριο
Σκυροδέματος, Κως, 15-17 Οκτωβρίου 2003.
-
Karakostas, C.Z., Lekidis, V.A., Papadimitriou, C., Karamanos, S. Pavlidou, M. (2003). "System Identication and Analytical Investigation of the Dynamic Response of Instrumented Civil Engineering Structures." 4th Int. Conf. On Earthquake Resistant Engineering Structures, Ancona, Italy.
-
Papadimitriou, C., Pavlidou, M., Christodoulou, K. and Karamanos, S.A. (2002). "Optimal Sensor Optimal Sensor Configuration Methodology for Structural Identification." Proc. 1st European Workshop on Structural Health Monitoring, D.L. Balageas (Ed), DESteck Publications, pp. 153-160.
-
Pavlidou, M., Christodoulou, K., Karamanos, S.A. Papadimitriou, C., Perdikaris, P.C., Lekidis, V.A. and Karakostas, C.Z. (2002). "Model Updating of Bridges Using Vibration Measurements." Proc. 1st European Workshop on Structural Health Monitoring, D.L. Balageas (Ed), DESteck Publications, pp. 1107-1114.
-
Karamanos, S. A., Romeijn, A. and Wardenier, J., “Fatigue Design of Multi-planar Welded Tubular DT Connections.”, Eleventh International Offshore and Polar Conference, ISOPE 2001, Stavanger, Norway, June 2001
-
Papadimitriou, C., Christodoulou, K., Pavlidou, M. and Karamanos, S. A., “Optimal Sensor and Actuator Configuration for Structural Identification”, Proceedings DETC 01, Design Engineering Technical Conferences and Computers and Information in Engineering Conference, ASME, Pittsburgh, Pennsylvania, September 2001
-
Eleftheriadis, Ch. and Karamanos, S. A., “Pressure Effects on the Lateral Crushing of Elastoplastic Tubulars.”, ASME – Greek Section, 1st National Conference on Recent Advances in Mechanical Engineering, Patras, Greece, September 2001
-
Papaspyrou S., Valougeorgis D. and Karamanos, S. A., “Analytical Solutions of Sloshing Effects in Horizontal Cylindrical and Spherical Vessels”, ASME – Greek Section, 1st National Conference on Recent Advances in Mechanical Engineering, Patras, Greece, September 2001
-
Karamanos, S. A., “Stability of Straight and Bent Tubes Under In-Plane Bending.”, Fourth International Colloquium on Computation of Shell & Spatial Structures, paper No. 251, Chania, Crete, Greece, June 2000
-
Karamanos, S. A. and Papadimitriou, C., “Sensitivity of Inelastic Tube Collapse Pressure on Initial Imperfections: a Probabilistic Approach.”, Fourth International Colloquium on Computation of Shell & Spatial Structures, paper No. 52, Chania, Crete, Greece, June 2000
-
Karamanos, S. A. and Tassoulas, J. L., "Development of a Nonlinear “Tube” Element for Elongated Cylindrical Shells.", Third National Conference on Computational Mechanics, pp. 317-324, Volos, Greece, June 1999
-
Karamanos, S. A., Abeysinghe, R. and Koutsoukos, D. P., “Stability Design of Slender Bridge Piers Under Seismic Loads.”, 15th Annual International Bridge Conference, pp. 419-426, Pittsburgh, Pennsylvania, USA, June 1998
-
Karamanos, S. A., Romeijn, A. and Wardenier, J., “Numerical Simulation of Tubular Joints for Fatigue Analysis.”, Proceedings, Fifth National Congress on Mechanics, Vol. 1, pp. 371-379, Ioannina, Greece, August 1998
-
Karamanos, S. A., Romeijn, A. and Wardenier, J., “Fatigue Design of Multi-planar Welded Tubular DT Connections.”, Third National Conference on Steel Structures, pp. 185-192, Thessaloniki, Greece, October 1998
